ports:
1xSFP 1G
2xTX 10/100/1000
Industrial Mediaconverter
PoE+ PSE
DIP switches for some functions
PoE+ PSE
| FEATURES IEEE 802.3af/at, PSE complaint Support LFP (Link-fault-pass-through) function Support 16K Jumbo Frame Flow Control for Video Application Support 100/1000Base-X by dip-switch RJ45 support auto MDI/MDI-X function Copper port support 10/100/1000M Auto-negotiation speed, half/full-duplex Support Ethernet ESD protection Desk-top and Wall- Mounted Installation (with kits) Contact UsPDF |
||
| Standards | IEEE802.3 10Base-T | |
| IEEE802.3u 100Base-TX | ||
| IEEE802.3ab 1000Base-T | ||
| IEEE802.3z 1000Base-SX/LX | ||
| Performance | Processing Type: Store and Forward, Cut-through | |
| Operation Mode: Full/Half duplex mode | ||
| Back Bandwidth: 4.0Gbps | ||
| MAC Address table: 16Kbit | ||
| Packet Buffer Size: 1Mbit | ||
| Time Delay: <10us | ||
| Jumbo Frame : Max.16K | ||
| Copper Port | 10/100/1000Base-T | |
| RJ45, 100m | ||
| Non-POE | ||
| Cat5 UTP cable | ||
| Fiber Port | 100/1000Base-X SFP Slot | |
| Fiber Cable: Single-mode, 8.3/125, 8.7/125, 9/125, 10/125μm | ||
| LED indicators | PWR, FL/A, TL/A, GX, GE | |
| Dip-Switch | 1- ON Enable Link Fault Pass-Through OFF Disable Link | |
| 2- ON 16K Jumbo Frame, OFF Store and Forward | ||
| 3- ON Flow control enable, OFF Flow control disable | ||
| 4- ON FX Speed 100Mbps, OFF FX Speed 1000Mbps | ||
| Power | Working Voltage: 5~12VDC | |
| Power Consumption: ≤3W ( un-loaded) | ||
| Connector: DC Socket | ||
| Environment | Operating temperature : -20~70ºC | |
| Relative Humidity: 5-95% (no condensation) | ||
| Physical Characteristics | Installation: Rack-Mounted, Wall-mounted | |
| Dimension: 94*70*26mm | ||
| Weight: 0.4KG | ||